Troubleshooting Display Driver Failure in Win10/11

The “display driver failed to start” error message usually appears when you try to launch a game on Windows. The error message appears in the form of a Windows notification above the system tray area. When this error occurs, it causes your screen to go completely black. Sometimes it will recover, but sometimes it will require a hard reset.

When this error is at its worst, it can prevent you from playing your favorite games. As such, here is how you can fix the “display driver failed to start” error on a Windows 10 or 11 PC.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

1. Perform Some Display Driver-Related Fixes

The error message points to your display driver as the main culprit. As such, before you try anything else, you can try these display driver-related fixes to see if they do the job.

Roll Back the Latest Graphics Driver Update

If your graphics card’s driver has recently been updated, try rolling back to the old GPU driver. ARoll Back Driver option is usually only available for a short time (typically a few days) after updating a driver. Check out our guide torolling back drivers in Windows for further details about how to apply this potential resolution.

Install the Latest Driver for Your PC’s Graphics Card

People plagued with this error message have confirmed that updating your graphics drivers is a good solution for the “display driver failed to start” error. And while Windows usually handles driver updates through Windows Update, it sometimes won’t update NVIDIA and AMD GPU drivers.

You can update your graphics card’s driver yourself with the methods discussed in our guide toupdating GPU drivers on Windows .

Reinstall Your Graphics Driver

If your PC’s GPU already has the newest graphics driver available, consider reinstalling the graphics driver. It’s best to do a clean install to ensure your GPU’s driver is back to its factory defaults.

Check outhow to cleanly install and reinstall GPU drivers on Windows for more information.

2. Utilize the Hardware and Devices Troubleshooter

Windows has a Hardware and Devices troubleshooter that can help resolve the “display driver failed to start” error. This troubleshooting tool is no longer available within Settings or Control Panel, but it is still accessible via Command Prompt.

You can access and run the Hardware and Devices troubleshooting utility like this:

1. First, locate the Command Prompt by pressingWin + S , typing “cmd,” and clicking onCommand Prompt .
2. Enter and execute the Hardware and Devices command:
   msdt.exe -id DeviceDiagnostic
3. ClickNext to start the troubleshooting.
   
4. SelectApply this fix to rectify any issues Windows finds.

Click here

3. Lower the Windows Visual Effect Settings

Windows has various visual effect settings that can affect performance. Having too many visual effects enabled can potentially cause issues on PCs with more limited GPUs.

So, it’s recommended to select the “adjust for best performance” mode in the visual effect settings like this:

1. Right-clickStart , selectSearch , and input “advanced system settings” in the text box.
2. Press theSettings button in thePerformance category.
   
3. Click theAdjust for best performance radio button, which will deselect most if not all of the effect checkboxes.

4. SelectApply to set the new performance settings.
5. Click the Performance Options window’sOK button.

4. Edit the GraphicsDrivers Registry Key

Some users have got the “display driver failed to start” error fixed by editing the GraphicsDriver registry key. This tweaking involves adding a newTdrDelay DWORD value to that key for extending Timeout Detection Delay.

You can edit the GraphicsDriver registry key like this:

1. Open the Run dialog withWin + R and enter “regedit”.
2. ClickOK or pressEnter to open the Registry Editor window.
3. Then enter this GraphicsDrivers key location inside the registry address bar:
   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers
4. Right-clickGraphicsDrivers and select theNew context menu option.
5. SelectDWORD (32-bit) Value to add a new entry.
   
6. TypeTdrDelay within the new DWORD’s text box.

7. Double-click theTdrDelay DWORD.
8. Input a value of5 in the data box and selectOK .
   
9. Now close the Registry Editor and reboot your PC.

5. Roll Back Windows to a Previous Restore Point

If you have System Restore enabled, restoring Windows to an earlier date is worth a try if nothing else has worked so far. Rolling back Windows will undo every system change made after a selected date.

As such, you can use System Restore to put your PC “back in time” to a moment when the error didn’t occur. It does mean you may lose some apps or data, so be sure to back up anything you want to keep.

Our guide toutilizing System Restore on Windows provides step-by-step instructions for how to roll back Windows 10 and 11. Select a restore point date created before you needed to fix the “display driver failed to start” error.

If this fixes the problem, be careful when re-installing the apps and drivers that got wiped during the restore. If you do, keep tabs on what you reinstalled and when. If the “display driver failed to start” error resurfaces, uninstall everything you recently reinstalled.

6. Perform a Windows Factory Reset

If System Restore is not an option or it doesn’t resolve the issue, you can try a factory reset as the last resort. Performing a factory reset will likely fix the “display driver failed to start” error. However, factory resetting a PC deletes all the apps that weren’t pre-installed with Windows. So, be prepared to reinstall all third-party apps you installed yourself.

You can apply a factory reset with the Reset this PC utility. That tool includes aKeep my files option you can select to keep files in your user folders (Documents, Pictures, Videos, etc). Our guide forfactory resetting Windows 10 and 11 provides details on how to access and utilize that tool.

Enjoy Your Windows Gaming Again

Applying those potential solutions will almost certainly be enough to fix the “display driver failed to start” error in most cases. However, you may need to try applying more than one of them to find one that works on your PC. Then you can get back to playing all your favorite Windows games again without further issues.

Also read: