How To Achieve Swift & Hassle-Free SD Card Upgrade

How To Achieve Swift & Hassle-Free SD Card Upgrade

William Lv12

How To Achieve Swift & Hassle-Free SD Card Upgrade

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Key Takeaways

  • Upgrading your Steam Deck’s SSD? Cloning is the best way to go. It saves time and transfers all your files, settings, and games to the new SSD.
  • You can use Macrium Reflect to clone your old SSD onto the new one. Make sure to save the backup image file and restore it on the new SSD.
  • After restoring the image onto the new SSD, install it onto your Steam Deck. It should boot up without needing to reinstall SteamOS or log in.

Are you upgrading your Steam Deck SSD but don’t want to set up your device from scratch? Here’s how to clone your SSD for an easier upgrade.

Why Cloning Your Steam Deck’s SSD Is Better

Steam Deck SSD installed without sleeve

Jhet Borja/MakeUseOf

Slotting in a new SSD into your Steam Deck doesn’t automatically load it with SteamOS, your login information, or your games. If you want to just plug in your new SSD into your Steam Deck without setting up the device from scratch, cloning is the best way to go.

Cloning your old SSD will trick your Steam Deck into thinking it’s the same one, except with more storage. All your files, Steam Deck settings, login information, games, etc., will all be recognized the same way by your Steam Deck.

If you’re looking to install a biggerSSD for your Steam Deck , clone your old one to it first so that you can immediately start downloading new games to it instead of sitting fussing about installing SteamOS.

How to Clone Your Steam Deck’s SSD to a New One

Cloning your old SSD to your new one will save you so much time. You won’t need to experience the time-consuming process of manually imaging SteamOS, logging in, waiting for updates, and getting all your old settings right. Here’s how you can do it…

Step 1: Download Macrium Reflect on a Separate PC

Since we’re not going to be using an SSD enclosure in this guide, we’re going to need a separate PC that has an NVMe/SATA M.2 slot on the motherboard.

On the PC, we’re going to use Macrium Reflect to clone the old SSD onto the new one.

Macrium Reflect trial download

Register and create aMacrium Reflect account and download the free trial as it has everything you need for this process.

Copy your registration code, click onDownload Trial on the Home version, and run the setup.

Macrium Reflect registration code

During the setup, check the box for the 30-day trial and enter your registration code when it asks for it.

Once the setup is done, and you’ve installed Macrium Reflect on your PC, you can now head to the next step.

Step 2: Image Your Old SSD

If you only have one SSD slot on your motherboard, then imaging your SSD is the only way to go.

Reinstalling Steam Deck SSD

Jhet Borja/MakeUseOf

First, remove your Steam Deck’s old SSD. If you don’t know how, check out thisSteam Deck SSD installation guide as you’ll be using it later to install your upgraded SSD as well.

Next, with your PC shut down and unplugged, you should install the NVME or M.2 SSD into your motherboard. Since the Steam Deck uses a 2230-size SSD, you most likely won’t be able to screw it down. But that’s okay so long as you don’t knock it off or move your PC too much during the process.

Image this disk button on Macrium Reflect

Now, turn on your PC and open up Macrium Reflect. Select your old Steam Deck SSD in the drives list and click onImage this disk… below it.

It will ask you where you want to save your image file. I chose to make a new folder so that I would remember where to get it from later. Macrium Reflect compresses images down to 40% of their original size, so make sure to have at least that much available space where you save it.

Prompt before running backup image

Name your backup image and click OK until it starts creating the image file. It can take anywhere from a few minutes to about an hour depending on the size of the drive and how much is on it. My 64GB SSD only took about five minutes.

If your motherboard has two SSD slots, you can clickClone this Disk instead of imaging. You can then follow similar steps, but skip the image restoration process by directly copying the partitions of the old SSD to the new one. This method is faster as it’ll do the cloning in one step.

Step 3: Restore Your Backup Image to Your New SSD

Now that your backup image is ready, you can now shut down your PC, replace the old SSD with your new one, and boot your PC back up.

Searching for disk management on Windows Search

Before you open up Macrium Reflect, search for “Create and format hard disk partitions” in the Windows search bar. This will open up the disk manager.

Converting to GPT partition scheme

Look for your new SSD—it should be black if it hasn’t been used before. Right-click on it and selectConvert to GPT Disk . The GPT partitioning scheme is what SteamOS works best with, so it’s best to use that.

Restore image tab on Macrium Reflect

Open up Macrium Reflect, and on the top menu bar, clickRestore > Browse for an image or backup file to restore… .

Restore button on Macrium Reflect

Once you find the image file that you created earlier, select it in Macrium Reflect and clickRestore .

Select a disk to restore to-1

A pop-up will appear, allowing you to choose where you want to restore the image to. Click onSelect a disk to restore to… , and choose your new SSD.

Copying partitions to new disk-1

Click onCopy partitions > Exact Offset and Length . This will visualize the partitions on the new SSD. Don’t worry about the empty space, leave that blank as SteamOS will immediately utilize it once you boot up your Steam Deck.

Click onNext until theFinish button is clickable. This will start pasting the image onto the new SSD. It can take a while depending on how big the whole operation is.

Step 4: Insert Your New SSD Into Your Steam Deck

Once the old SSD’s image has been copied onto your new SSD, you can now shut down your PC and install the drive onto your Steam Deck.

Steam Deck playing Palworld

Jhet Borja/MakeUseOf

Power on your Steam Deck, and it should boot up without you needing to reinstall SteamOS or even log in at all.

If SteamOS somehow cannot be found, shut down your Steam Deck and go to the BIOS.

You can open up the BIOS by holding down the volume up button and the power button. You should let go of the power button when you hear a chime, but still hold down the volume up button until the BIOS appears.

Selecting steamcl.efi in Steam Deck BIOS to boot into SteamOS

Jhet Borja/MakeUseOf

SelectBoot from file > eps > efi > steamos > steamcl.efi . You’re manually booting into SteamOS with this method and the next time you turn on your Steam Deck, you shouldn’t need to do this again unless you have another OS on your Steam Deck.

You can now go ahead and immediately download your games without ever worrying about setting your Steam Deck up from scratch. We hope this guide has made it easier for you to upgrade your SSD.

Also read:

  • Title: How To Achieve Swift & Hassle-Free SD Card Upgrade
  • Author: William
  • Created at : 2024-12-15 02:34:50
  • Updated at : 2024-12-16 22:08:09
  • Link: https://games-able.techidaily.com/how-to-achieve-swift-and-hassle-free-sd-card-upgrade/
  • License: This work is licensed under CC BY-NC-SA 4.0.